Filter
Top Products
Installation
18 Crystal Series LCD Installation/Operation Manual
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the Crystal Series LCD installation process. The
sections following this one provide detailed instructions.
Installation must be performed by a qualified, trained custom video
installation specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, refer to
page...
1
Mount the Crystal Series LCD on a wall (optional) 19
2
Connect signal sources to the Crystal Series LCD 19
3
Connect external controller to RS-232 port (optional) 25
4
Apply power to the Crystal Series LCD 27
5
Change the OSD language 27
6
If using the Crystal Series LCD with a PC, adjust PC display
properties
28
7
Display calibration: adjust the following for each input;
save settings when finished:
• Brightness
• Contrast
• Color level
• Tint
• Input position
31 through 40
Note