Filter
Top Products
Installation
14 Vidikron VL-40 and VL-46 Owner’s Operating Manual
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the DView installation process. The sections following this
one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, refer to
page...
1
Mount the DView on a wall (optional) 15
2
Connect signal sources to the DView 16
3
Connect external controller to RS-232 port (optional) 23
4
Apply power to the DView 25
5
Change the OSD language 25
6
If using the DView with a PC, adjust PC display properties 26
7
Display calibration: adjust the following for each input; save
settings when finished:
• Brightness
• Contrast
• Color level
• Tint
• Input position
29 through 41
Note