Filter
Top Products
English - 2
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢
Caution: One pole switch is totally not off(one line still live)
if power cord is not unplugged.
Viewing the Menus
1 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: “Input”, “Picture”, “Sound”, “Channel”,
and “Setup”.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the MENU button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
Remote Control (depending on the model)
➢
Operation of remote control may be affected by bright
artificial light near to the TV.
1 POWER
Turns the TV on and off.
2 MENU
Displays the main
on-screen menu.
3 ▲/▼/◄/►
Controls the cursor in
the menu.
VOL +, VOL -
Press to increase or
decrease the volume.
CH , CH
Press to change
channels.
4 MUTE
Press to temporarily cut
off the sound.
5 Number buttons
Press to select channels
directly on the TV.
6 INFO
Press to display
information on the TV
screen.
7 SOURCE
Press to display all
of the available video
sources.
8 TOOLS (depending on
the model)
You can check the
following selection by
pressing TOOLS button.
1. Sleep Timer
Press to select a
preset time interval
for automatic shut off.
2. Picture Mode
Used to select the
picture effect.
3. Sound Mode
Used to select sound
effect.
4. MTS(Multi-channel
Television Sound)
Press to choose
"Stereo" or "Mono".
5. Turbo Sound
Used to select the
turbo sound option.
6. R. SURF
Press to automatically
return to a preferred
channel after a user
preset time delay.
7. Sound Adjust
Used to display the
sound adjust menu.
9 ENTER
While using the
on-screen menus, press
ENTER to activate
(or change) a particular
item.
0 EXIT
Press to exit the menu.
! PRE-CH
Tunes to the previous
channel.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not operate
normally, check that the “+” and “–” ends of
the batteries are inserted correctly or the
batteries are drained.
➢
Do not mix battery types, i.e. alkaline and manganese.
Connecting to the Headphones
The 3 (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
➢
When both the front (or side) AV and rear connectors are
connected to external equipment, the front (or side) AV
receives priority.
AA68-03992K-Eng.indd 2 2009-03-04 오전 11:05:54