Samsung 400DX-3 Flat Panel Television User Manual


 
, → ENTER
Adjusts the Transparency of PIP windows.
High
Medium
Low
Opaque
Note
PIP turns off when the LCD Display is switched to an external source.
For
PC and DVI, this is deactivated if the cable is disconnected.
Edit Name
MENU → ENTER → → ENTER →
, → ENTER
Name
the
input device connected to the input jacks to make your input source selection
easier.
VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game /
Camcorder / DVD Combo / DHR / PC / BNC / HDMI / Component / AV / DVI
Note
The displayed devices differ depending on the external input mode.
When connecting a PC to the HDMI or DVI terminal, set Edit Name to PC. In other cases,
set Edit Name to AV. However, since 640x480, 720P (1280x720), and 1080p (1920x1080)
are common signals for AV and PC, make sure to set the Edit Name in accordance with
the input signal.
The Picture menu changes depending on the input signal and Edit Name.
Adjusting the LCD Display