Filter
Top Products
16
English
Warning
When you use the DC power output jack, you have to check the standard output
power of STB(SBB) and you should use the DC power within the standard
output(Class 2 Wiring-5V DC/2.5A (12V DC/1.5A).
–
For 5V SBB, SBB load current must not exceed 2.5A.
–
For 12V SBB, SBB load current must not exceed 1.5A.
–
The initial output is 5V.
–
For 12V SBB, you have to change the output voltage to 12V in order to use
the power.
Changing the Output Voltage (Only for EU C457 26" 32" 37" 40" model)
1. Press the POWER button.
✎
The TV is powered on.
2. Press the following remote control buttons in order.
INFO → MENU → 0 → 1 → EXIT
✎
The Hotel Option menu appears.
3. Press the ▲ or ▼ button to select DC Power Output.
Press the ◄ or ► button to select 12V or 5V.
4. Remove the power cord then plug it back in again.
✎
The voltage change is applied when you turn the TV on
again after changing the Interactive mode Option setting.
Hotel Mode
ON
RJP Priority AV
1
Logo Download
...
SI Vendor
Samsung
RJP Priority PC
2
Logo Display Time
...
Power On Channel
1
RJP Priority HDMI
3
Power On Option
Last Option
Channel Type
ATV
RJP AV Option
AV1
Auto Source
OFF
Power On Volume
10
RJP HDMI Option HDMI1
Energy Saving
Off
Min Volume
0
Sub AMP Volume
6
Clone : TV to USB
Max Volume
100
Sub AMP Mode
2
Clone : USB to TV
Panel Button Lock
Unlock
Local Time
Manual
Pan Euro MHEG
OFF
Power On Source
TV
Time Format
12 Hour
Cloning Data Reset
OFF
Picture Menu Lock
OFF
PMOLED Test
Failure
Welcome Message
Channel Editor
PMOLED Mormal Dim.
3
Edit Welcome Message
Music Mode AV
OFF
PMOLED Standby Dim.
2
DC Power Out
5V
Music Mode PC
OFF
Audio Loop In
OFF
Channel Auto Store
Music Mode Comp
OFF
Menu Display
ON
Dynamic SI
OFF
Music Mode Backlight
OFF
Hotel Logo
OFF
LC452_453_457-hotel.indd 16 2010-04-12 오후 8:37:29