Filter
Top Products
English - 22
Resetting the Picture Settings to the Factory Defaults
1. To select the desired picture mode, follow the “Changing the Picture
Standard” instructions numbers 1 and 2. (see page 18)
2.
Press the ▲ or ▼ button to select “Picture Reset”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “OK” or “Cancel”, then press the
ENTER button.
Press the EXIT button to exit.
Each mode can be reset.
➣
Setting the xvYCC
Setting the xvYCC mode to “On” increases detail and color space when watching
movies from an external device (ie. DVD player) connected to the HDMI or
Component IN jacks.
24.
Press the ▲ or ▼ button to select “xvYCC”, then press the ENTER
button.
25.
Press the ▲ or ▼ button to select “Off” or “On”.
Press the ENTER button.
“xvYCC” is available when the picture mode is set to “Movie”, and the
external input is set to “HDMI” or “Component” mode.
➣
Detailed Settings
Picture Options
PictureReset ►
Picture
Enter
Detailed Settings
▲
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto
White Balance
Flesh Tone : 0
Edge Enhancement : Off
xvYCC : Off ►
Move
Return
xvYCC :
EnterMove
Return
Off
On
Picture
Detailed Settings
Picture Options
PictureReset ►
OK
Cancel
BN68-01392K-ENG.indb 22 2008-03-19 ¿ÀÈÄ 4:58:12