Filter
Top Products
English _19
! INSTALLATION
Install a HDD (x1) on the lower bracket and fix it with
screws.
Firmly secure the screw so that it does not become
loose from vibration.
Install HDDs (x3) on the upper bracket and fix them
with screws.
When the installation of additional HDDs is done,
insert the lower and upper brackets into the DVR
and fix them with the provided screws.
When the installation of additional HDDs is done,
connect the power cable and connect the HDD
data cables (SATA Cable) to connectors ~ on
the main board.
Note that the number of a HDD data calbe is nothing to
do with operation of the HDD. Just make arrangements
of the connectors considering the length of each
connector.
Check if the connectors are properly connected and
there is no problem with wiring, and close the cover
and fix it with screws.
3.
4.
5.
6.
`
7.
Upper Bracket
Lower
Bracket
Cover