Samsung AK68-00141K DVD Player User Manual


 
SETUP
Display Indicators
10 11
1. Disc type indicators
2. Play / Pause / Forward play
3. Displays various messages concerning operations such as
PLAY, STOP, LOAD ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
1
2
3
Front Panel Display
Rear Panel
Description-Rear Panel
1. DIGITAL AUDIO OUT JACKS
Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2. 5.1CH ANALOG AUDIO OUT JACKS
Connect to an amplifier with 5.1ch analog input jacks.
3. MIXED AUDIO OUT JACKS
Connect to the Audio input jacks of your television, audio/video receiver.
4. VIDEO OUT JACK
Use a video cable to connect to the Video input jack on your television.
The VIDEO OUT SELECT switch must be set to the 525i(480i) or S-VIDEO position.
5. S-VIDEO OUT JACK
Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture.
The VIDEO OUT SELECT switch must be set to the S-VIDEO position.
6. COMPONENT VIDEO OUT JACKS
Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality.
If 525P(480P) VIDEO is selected, progressive scan mode will work.
If 525i(480i) VIDEO is selected, interlaced scan mode will work.
7. VIDEO OUT SELECT SWITCH
Use this switch to set video out.
If 525P(480P) VIDEO is selected, VIDEO and S-VIDEO will not work.
12 34567
DVD-P538K
Consult your TV Users Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV Users Manuals instructions regarding
Progressive Scan settings in the TVs menu system.
If 525P(480P) VIDEO OUT is selected, VIDEO and S-VIDEO will not work.
Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
Important Note
E138A 00141K-1(GB)XTC 4/9/03 10:21 AM Page 10