Samsung BD-E5300 DVD Player User Manual


 
14
NOTE
If the TV you connected to the player does not
support Movie Frame or the resolution you
selected, the message “If no pictures are shown
after selecting ‘Yes’, please wait for 15 seconds
to return to the previous resolution. Do you want
to change the resolution?” appears. If you select
Yes, the TV’s screen will go blank for 15 seconds,
and then the resolution will revert to the previous
resolution automatically.
If the screen stays blank after you have changed
the resolution, remove all discs, and then press and
hold the PLAY/PAUSE
( )
button on the front of
the player for more than 5 seconds. All settings are
restored to the factory default. Follow the steps on
the previous page to access each mode and select
the Display Setup that your TV will support.
When the factory default settings are restored, all
stored user BD data is deleted.
The Blu-ray Disc must have the 24 frame feature
for the player to use the Movie Frame (24Fs) mode.
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to Auto
allows you to adjust the player’s HDMI output to
24 frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate.
You can select Movie Frame only when the
player is in the HDMI 1080i or 1080p output
resolution modes.
• Auto : Movie Frame (24Fs) functions work.
• Off : Movie Frame (24Fs) functions are off.
HDMI Color Format
Lets you set the color space format for
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
• Auto : Automatically sets the player to the
optimum format supported by your device.
• YCbCr (4:4:4) : If your TV supports the
YCbCr color space via HDMI, select this to
output the normal YCbCr color gamut.
• RGB (Standard) : Select to output the
normal RGB color gamut.
• RGB (Enhanced) : If you have connected
the player to a DVI display device such as a
monitor, select this to output the enhanced
RGB color gamut.
HDMI Deep Color
Lets you output video from the HDMI OUT jack with
Deep Color. Deep Color provides more accurate
color reproduction with greater color depth.
• Auto : The player outputs video with Deep
Color to a connected TV which supports
HDMI Deep Color.
• Off :
The picture is output without Deep Color.
Progressive Mode
Lets you improve picture quality when viewing DVDs.
• Auto :
Select to have the player
automatically select the best picture quality
for the DVD you’re watching.
• Video : Select for the best picture quality
from concert or TV show DVDs.
Audio
Digital Output
Set the Digital Output to match the capabilities of
the AV receiver you’ve connected to the player :
• PCM : This is the default setting. It is compatible
with most TVs and receiver.
Digital Output Selection
Setting PCM
Bitstream
(Unprocessed)
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
Connection
HDMI
supported
AV
receiver
Coaxial
HDMI
supported
AV receiver
Coaxial
HDMI
supported
AV receiver or
Coaxial
HDMI
supported
AV receiver or
Coaxial
Audio
Stream on
Blu-ray
Disc
PCM
Up to PCM
7.1ch
PCM 2ch PCM PCM 2ch DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital
Plus
PCM 2ch PCM 2ch
Dolby Digital
Plus
Dolby Digital DTS re-encoded
Re-encoded
Dolby Digital *
Dolby TrueHD
PCM 2ch PCM 2ch
Dolby TrueHD
Dolby Digital DTS re-encoded
Re-encoded
Dolby Digital *
DTS PCM 2ch PCM 2ch DTS DTS DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD HRA PCM 2ch PCM 2ch DTS-HD HRA DTS DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD MA PCM 2ch PCM 2ch DTS-HD MA DTS DTS re-encoded
Re-encoded
Dolby Digital *
Audio
Stream on
DVD
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital
DTS PCM 2ch PCM 2ch DTS DTS DTS DTS
• Bitstream (Unprocessed) : Choose if you want
your receiver to decode all the audio.
Bonusview audio will not be available.
• Bitstream (Re-encoded DTS) : The original
audio will be re-encoded into DTS.
• Bitstream (Re-encoded Dolby D) : The original
audio will be re-encoded into Dolby Digital.
For more details, please refer to the Digital Output
Selection table.