Filter
Top Products
English - 2
Selecting a Source
To watch a movie on your Blu-ray player or watch your favorite TV show, you must
select the correct source. A source is a device, such as a Blu-ray/DVD player, a
cable/satellite box, antenna or a cable TV input. Sources can be connected to
your TV through the HDMI, DVI, Component,
Composite, or D-sub connections, or through the
Antenna or Cable In connections.
To view the signal from a source connected to the
HDMI, DVI, Component, Composite, or D-sub
jack, press the SOURCE button on your remote.
Each time you press the SOURCE button, you
change to a different source.
Viewing the On Screen Menus
To view the On Screen Menus, follow these steps:
1. With the power on, press the MENU button
on your remote. The main menu appears.
The menu’s left side has the following menu
options: Picture, Sound, Channel,
Setup, Input, Application, and Support.
2. Press the ▲ or ▼ button on your remote to
select a menu option, and then press the ENTERE button.
3. When done using the menu, press the EXIT button on your remote to exit.
BN68-02664A-03
Setting the Clock
Before you can use your TV’s On/Off Timer, you must set the clock. To set the
clock, follow these steps:
1. Turn on your TV.
2. Using your remote, press the
MENU button on your remote.
Then, select Setup → Time.
3. Select Clock Mode, and then
press the ENTERE button.
Set Clock Mode to Manual.
Select Auto if you have a digital
✎
channel in your area and are not
using a cable/sat box.
4. Select Clock Set, and then press
the ENTERE button.
The Clock Set screen appears.
5. Using the number buttons on your remote, enter the Month, Day, Year, Hour,
and Minute. Use the ◄ or ► button to move between entry fields.
6. Press the RETURN button on your remote when done.
Connecting a USB Device for Media Play
You can enjoy photo, music, and movie files
stored on a USB device by connecting it to the TV
and using the Media Play feature. To connect a
USB device for Media Play, follow these steps:
1. Turn on your TV.
2. Connect a USB device
containing photo, music and/or
movie files to the USB jack on
the side of the TV.
3. When the Application selection
screen appears, press the
ENTERE button on your
remote to select Media Play
(USB).
Remote Control Buttons and Functions:
This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume buttons.
✎
P. MODE
MEDIA.P
ABCD
S.MODE
P. SIZE
SLEEP
CC
MTS
Press to select additional digital channels broadcast by
the same station. For example, to select channel 54-3,
press 54, press -, and then press 3.
Press number buttons for direct access to channels.
Turns the TV on and off.
Displays the channel list on the screen.
Quickly selects frequently used functions.
Return to the previous menu.
View the Media Play.
Colored buttons for use in the Channel List, Media
Play menu, etc.
Adjusts the volume.
Use these buttons in the Media Play and Anynet+ modes.
(
: Controls recording on Samsung recorders with the
Anynet+ feature)
Return to the previous channel.
Press to switch between the sources (Blu-ray player,
cable box, DVD player, etc.) connected to your TV.
Cut off the sound temporarily.
Displays Favorite Channel Lists on the screen.
Press to display information on the TV screen.
Exit the menu.
Change channels.
Displays the main on-screen menu.
S.MODE: Selects the sound mode.
SLEEP: Setting the Sleep Timer.
MTS: Press to choose stereo, mono or Separate Audio
Program (SAP broadcast).
P.MODE: Selects picture mode.
P.SIZE: Choose the picture size.
CC: Controls the caption decoder.
Use these buttons to select On Screen Menu items and
change menu settings.
Changing the Picture Mode
Your TV has three preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under specific conditions.
The Picture Modes are listed and described in the table below:
Mode Description
Dynamic
Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.
Standard For a bright, detailed picture in a normally lit room.
Movie For a studio quality cinema picture in a dimly lit or dark room.
To change the Picture Mode, follow these steps:
1. Turn on your TV.
2. Using your remote, press the MENU button on your remote.
Then, select Picture → Mode.
3. On the Picture Mode menu, use the ◄ or ► on your remote to select
the Picture Mode you want.
4. Press the EXIT button to exit the menu.
P. MODE
MEDIA.P
ABCD
S.MODE
P. SIZE
SLEEP
CC
MTS
MENU
Changing Channels and Adjusting the Volume
P. MODE
MEDIA.P
ABCD
S.MODE
P. SIZE
SLEEP
CC
MTS
Change the channels by pressing
the
z
button on the remote.
If your TV is attached to a cable
✎
or satellite box, you change the
channel using the box’s remote.
Adjust the volume by pressing the
y
button on the remote.
You can also change the
channels by pressing the
z
buttons on
the front panel of your TV
and adjust the volume by
pressing the
y
buttons.
Power Indicator
Remote control sensor
L
Move
U
Adjust
E
Enter
R
Return
Clock Set
Month Day Year
Hour Minute am/pm
-- -- ----
-- -- --
P.MODE
MEDIA.P
ABCD
S.MODE
P.SIZE
SLEEP
CC
MTS
P.MODE
MEDIA.P
ABCD
S.MODE
P.SIZE
SLEEP
CC
MTS
Channel
Volume
TV Side Panel
USB Drive
MediaPlay
Videos
SUM
A
Change Device
D
View Devices E Enter R Return
[LC450_QSG]BN68-02664A-03Eng.indd 2 2010-08-31 �� 3:48:45