6
Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in confi guring basic settings. Press the POWER
P
button.
Plug & Play is available only when the Input source is set to TV.
1
Selecting a language
Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the desired OSD (On Screen Display) language.
P.SIZE
HDMI
P
POWER
P.MODE
CH LIST SRS
MEDIA.P
SLEEP
2
Selecting Store Demo or
Home Use
Press the ◄ or ► button, then press the ENTER
E
button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y Return the unit’s settings from Store Demo to Home Use (standard):
Press the volume button on the TV. When the OSD volume is displayed,
press and hold MENU for 5 sec.
3
Selecting an area.
Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the appropriate area.
4
Selecting a channel
Press the ENTER
E
button, then the channel search will start automatically.
For more information, refer to Channel → Auto Store. (P. 11)
✎
Press the ENTER
E
button at any time to interrupt the memorisation process.
5
Setting the clock
Press the ◄ or ► button to select Month, Day, Year, Hour, Minute or am/pm.
Set these by pressing the ▲ or ▼ button.
6
Enjoy your TV.
Press the
ENTER
E
button.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change
the PIN number, use the Change PIN function.
✎
You should do Plug & Play (MENU → System) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to
“0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF)
Service
Connector for service only.
✎
The position of power input port may differ depending on the model.
VHF/UHF Antenna
Cable
or
TV Rear Panel
[UA-ASIA]BN68-03708A-ENG.indb 6 2011-05-12 �� 2:03:19