Filter
Top Products
English - 6
Picture - PIP
(depending on the model)
You can display a sub picture within the main picture
of TV program or external A/V devices such as VCR
or DVD.
In this way you can watch TV program or monitor the
video input from any connected devices while
watching TV or other video input.
◆ PIP: On/Off (Œ)
You can activate or
deactivate the PIP
function.
➢
If the PIP is activated
(On) when the
picture size is set to
“Zoom” mode, the picture size is automatically
converted into “Normal” mode. However, you
can select “Zoom” after activating the PIP.
➢
You can hear only the sound of the main
picture while the PIP is activated.
➢
The PIP function is not available in
“Component” mode.
◆ Source
You can select a source of the sub-picture.
◆ Swap (´)
You can interchange the main picture and the sub-
picture.
◆ Size: Small/Large
You can select a size of the sub-picture.
◆ Position: / / /
You can select a position of the sub-picture.
◆ Channel (ˇ)
You can select a channel of the sub-picture only
when the “Source” is set to “TV”.
Move Enter Return
PIP
PIP : On
√√
Source : AV1
√√
Swap
√√
Size : Large
√√
Position :
√√
Channel : 3
Easy functions of the
remote control
◆ Color Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can change the color of the entire screen
according to your preference.
◆ Reset
The previously adjusted picture settings will be
reset to the factory defaults.
◆ Size: Normal/Zoom
You can select the picture size which best
corresponds to your viewing requirements.
➢
Press the P.SIZE button on the remote control
to change the picture size.
◆ Digital NR
If the signal received by the TV is weak, you can
activate this feature to reduce any static and
ghosting that may appear on the screen.
◆ DNIe Jr
(Digital Natural Image engine Junior)
(depending on the model)
This feature bring you more detailed image with
detail enhancement, contrast enhancement and
white enhancement. New image compensation
algorithm gives brighter, clearer, much detailed
image to you.
DNIe Jr technology will fit every signals into your
eyes.
◆ Tilt (depending on the model)
If you find that the picture received is slightly tilted
to one side, you can adjust the tilt setting.
This feature allows you to
set the TV to return to a
particular channel after a
certain amount of time. For
example, you may be
watching a channel when
commercials start. You can
set the R.Surf to “5 minutes”, then switch channels.
After minutes, the TV will return to the original
channel.
Press the
R.SURF button repeatedly to set the timer
in thirty second intervals, up to five minutes.
R.Surf Feature
Surf 00: 29
Picture -
Mode / Custom /
Color Tone / Size /
Digital NR / DNIe Jr / Tilt
◆ Mode:
Dynamic/Standard
Movie/Custom
You can select the type of
picture which best
corresponds to your
viewing requirements.
➢
Press the P. MODE
button on the remote
control to select one
of the standard
picture settings.
◆ Contrast/Brightness/
Sharpness/Color/Tint
The TV has several settings which allow you to
control the picture quality.
Move Enter Return
Picture
Mode : Dynamic
√√
Size : Normal
√√
Digital NR : Off
√√
DNIe Jr : On
√√
Tilt : 0
PIP
√√
Move Enter Return
Mode
Mode : Dynamic
√√
Contrast : 100
Brightness : 50
Sharpness : 75
Color : 50
Tint : G 50 R 50
Color Tone : Cool1
√√
Reset
√√
AA68-03858A-03Eng 8/16/06 1:29 PM Page 6