Filter
Top Products
English-36
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable)
1 Press the MENU () button.
Result
: The main menu is displayed.
2 Press the ENTER () button to select Input.
Result
: The options available in the Input group are
displayed.
3 Press the ENTER () button again to select Source List.
Result
: The options available in the Source List group are
displayed.
4 Press the ▼ or ▲ button to select signal source, then press the
ENTER () button.
➢
When you connect equipment to the TV, you can choose
between the following sets of jacks :
AV1, AV2, S-Video or
Component on the TV’s rear panel, and AV2 or S-Video on
the TV’s side (or front) panel.
➢
S-Video and Component signal sources are depending on
the model.
5 Press the MENU () button.
Result
: The main menu is displayed.
6 Press the ENTER () button to select Input.
Result
: The options available in the
Input group are
displayed.
7 Press the ▼ or ▲ button to select Edit Name. Press the ENTER
() button.
Result
: The options available in the Edit Name group are
displayed.
Viewing an External Signal Source (depending on the model)
Move Enter Return
Input
Source List
√√
Edit Name
√√
TV
Move Enter Return
Input
Source List
√√
Edit Name
√√
TV
Move Enter Return
Source List
TV
AV1 ----
AV2 ----
S-Video ----
Component ----
TV
AA68-03582A-00Eng 3/3/05 4:05 PM Page 36