Samsung CRT Rear-Projection TV CRT Television User Manual


 
English - 6
Pseudo Stereo
This feature converts a monaural sound signal into two
identical left and right channels. Once the Pseudo
Stereo is set to On or Off, these settings apply to the
sound effects such as Standard, Music, Movie, and
Speech.
Turbo Sound : Off/Plus/Voice
This feature suitably emphasizes both higher and
lower bands of sound (and includes other effects).
You can enjoy more magnificent and dynamic
sound when watching music, movie or other
channels.
You can change the options simply by pressing the
TURBO button on the remote control.
Picture
(depending on the model)
-
Mode / Custom /
Color Tone / Size /
Digital NR / DNIe Jr / Tilt
Mode: Dynamic/
Standard/Movie/Custom
You can select the type of
picture which best
corresponds to your viewing
requirements.
You can select these
options simply by pressing the P. MODE button on
the remote control.
Custom: Contrast/Brightness/Sharpness/
Color/Tint (NTSC only)
The television has several settings which allow you to
control the picture quality.
If you make any changes to these settings, the
picture mode is automatically switched to Custom.
Color Tone: Cool2/Cool1/Normal/Warm1/
Warm2
Size
You can select the picture size which best corresponds to
your viewing requirements. It is variable depending on
the model.
You can change the picture size simply by pressing
the P.SIZE button on the remote control.
Digital NR
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting
that may appear on the screen.
DNIe Jr
(Digital Natural Image engine Junior)
This feature bring you more detailed image with detail
enhancement, contrast enhancement and white
enhancement. New image compensation algorithm gives
brighter, clearer, much detailed image to you. DNIe Jr
technology will fit every signals into your eyes.
Move Enter Exit
Mode : Dynamic
Custom
Color Tone : Normal
Size : Normal
Digital NR : Off
DNIe Jr : On
Picture
TV
Sound
(depending on the model)
-
Mode / Equalizer /
Auto Volume / Pseudo Stereo /
Turbo Sound
Mode: Standard/Music
/Movie/Speech/Custom
You can select the type of
special sound effect to be
used when watching a given
broadcast.
You can select these
options simply by pressing the S.MODE button on
the remote control.
Equalizer
The television has several settings which allow you to
control the sound quality.
If you make any changes to these settings, the
sound mode is automatically switched to Custom.
Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
continued...
Move Enter Exit
Mode : Custom
Equalizer
Auto Volume : Off
Pseudo Stereo : Off
Turbo Sound : Off
Sound
TV
AA68-03582C_Eng 8/16/06 4:11 PM Page 6