Filter
Top Products
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1 If the television is in Standby mode, press the POWER () button
on the remote control.
Result
: The message Plug & Play is displayed. It flickers for
a little while and then
Language menu is automatically
displayed.
2 Select the appropriate language by pressing the œ or √ button.
Press the
MENU
()
button to enter the language.
Result
: The message Check antenna input. is displayed.
➢
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
3 Make sure that the antenna is connected to the TV.
Press the
œ or √ button.
Result
: The Auto Store menu is displayed with Area is
selected.
4 Select your Area by pressing the œ or √ button. To search the
channels, select
Search by pressing the ▼ or ▲ button, and then
press the
œ or √ button. Press the MENU
()
button to stop the
search.
Result
: The Time menu is displayed with Clock is selected.
➢
Refer to “Storing Channels Automatically” on page 15.
5 Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the
▼ or ▲ button.
➢
Refer to “Setting and Displaying the Current Time” on page
33.
6 When you have finished, press the MENU
()
button.
Result
: The message Enjoy your watching. is displayed,
and then the channel which has been stored will be
activated.
7 If you want to reset this feature...
1 Press the MENU
()
button.
2 Press the ▼ or ▲ button to select Setup, and then press the
ENTER () button.
Result
: The Plug & Play is selected.
3 Press the ENTER () button again.
Result
: This feature starts with the message Plug & Play
is displayed.
Plug & Play Feature
Plug & Play
Enjoy your watching.
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Blue Screen : Off
Melody : On
Demonstration
√√
TV
Move
œœ √√
Adjust Skip
Auto Store
Area
œœ
ASIA W/EUROPE
√√
Search : -/+
TV
Move
œœ √√
Adjust Skip
Time
Clock -- : -- am
Sleep Timer : Off
On Timer -- : -- am Off
Off Timer -- : -- am Off
On Timer Volume : 10
On Timer Channel : P 1
TV
Check antenna input.
œœ √√
Move Skip
English-13
œœ √√
Adjust Skip
Setup
Plug & Play
√√
Language
œœ
English
√√
Time
√√
Blue Screen : Off
Melody : On
Demonstration
√√
TV
AA68-03362A-01Eng_Asia 6/10/04 1:44 PM Page 13