Filter
Top Products
GB-24 GB-25
Digital Terrestrial Receiver
GB
4.5 System Information
If you have to contact your service provider or a service center
they might ask for information available from this menu.
Place the cursor on this sub menu and press the OK key.
The following will be the on-screen display.
4.6 Software Upgrade
You can download and upgrade the system software of the
receiver through a specific channel through a specific channel
designated by the broadcaster. The Broadcaster will provide you
with more information about that.
If you select to download a new software version, all your
previous settings, access code and favorite channels etc. will
be erased! Downloading may take a While ‘During downloading’
don’t turn off the receiver.
4.7 MHP App Control
If you want to change the display mode of MHP application,
please follow the instruction below.
● Select Auto Start or Not Allowed in Auto Start Control
mode with the
ᮤ
/
ᮣ
keys.
● Select On/Off in show Apllication List mode with the
ᮤ
/
ᮣ
keys.
● Press the GREEN key to edit contents in Phone Number,
User Name and Password.
● Insert value by the Numerical (0~9) and
ᮤ
/
ᮣ
keys in DNS.
● Press ‘OK’ to save MHP App Control.
NNoottee : Exit without OK key makes MHP App Control
unchanged.
4.8 Modem Setup
If you want to setup Modem, please follow the instruction below.
● Select Tone or Pulse in Dial Method.
● Select the ‘Carrier Wait Time’ ranged in
1~255 seconds with the
ᮤ
/
ᮣ
keys or numeric keys.
● Select the ‘Carrier Present Time’ ranged in
0.1~25.5 seconds with the
ᮤ
/
ᮣ
keys or numeric keys.
● Select the ‘Carrier Loss Time’ ranged in
0.1~25.5 seconds with the
ᮤ
/
ᮣ
keys or numeric keys.
● Select Blank, 0, # or 9 in Prefix by using
ᮤ
/
ᮣ
keys,
to specify your pre-dialing key for phone extension.
● Press ‘OK’ to save Modem configuration if modified.
NNoottee : Exit without OK key makes Modem Setup unchanged.
4.9 Auto Operation Setting
You can set the parameters for searching new channels and
upgrading new software.
● Select YES or NO in Standby Mode and Operate Mode by
using
ᮤ
/
ᮣ
keys.
● Insert the preferable time by the Numerical (0~9), CH+/CH-
and
ᮤ
/
ᮣ
keys.
● Press the
ᮤ
/
ᮣ
keys to choose Repetition you want to
reserve: Daily, Every Sunday, Every Monday, Every Tuesday,
Every Wednesday, Every Thursday, Every Friday and
Every Saturday.
NNoottee : If YES in Standby Mode (with selecting NO in
Operate Mode or Aborting the operation in progress
in Operate Mode), the receiver automatically starts
auto operation in Standby Mode after 45 minutes for
new software and 1 hour for new channels from
entering the standby mode.
OPERATING THE RECEIVER OPERATING THE RECEIVER
MF68-00345A(REV1.2)_GB 4/18/05 1:27 PM Page 24