Filter
Top Products
English
- 17
You do not need to preset the stations manually
if you have already set them automatically.
1 Press the MENU button, then press the OK or
button.
2 Press the or button to select Install,
then press the OK or button.
The Install menu is displayed.
3 Press the or button to select Manual
Setup, then press the OK or button.
The TV STATION TABLE menu is displayed.
4 Press the or button to select the
required programme number.
5 Press the button to preset the station.
The MANUAL TUNING menu will be dis-
played.
Press the ¥ or button to start scanning the
channels. The frequency band is scanned and
the first station found is displayed.
Presetting the Stations Manually
4 Press the OK button to start the auto scan-
ning. The message Please Wait is displayed.
• The first frequency band is scanned and
stored, then the DVD-VCR searches for the
second station and so on.
When the automatic scanning procedure
has finished, the DVD-VCR switches
automatically to programme 1.
• If you wish to cancel the auto scanning
before the end, press the MENU button.
• The number of stations automatically stored by the
DVD-VCR depends on the number of stations that
it has found.
•The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually
(refer to page 15).
• Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required (refer to
page 18).
OK
SETUP
VCR
PROG
FUNC
DVD
Setup
Language : English
Clock
Install
User Set
Auto Power Off : Off
Screen Messages : On
RETURN MENU
Please Wait
10%
RETURN MENU
Auto Setup
Note
OK
SETUP
VCR
PROG
FUNC
DVD
Install
RETURN MENU
Auto Setup
Manual Setup
VCR Output : CH60
SWAPPING : OK
DELETE : CLEAR RETURN
❉ ❉ TV STATION TABLE ❉ ❉
PR CH NAME
1 021
- - - -
2
3
4
5
XEU ENG 3 27/02/2006 13:36 Page 17