Filter
Top Products
ENG-8
Connecting DVD-VCR to the
TV using the RCA Cable
Connecting DVD-VCR to a
Satellite Receiver or Other
Equipment
You can connect your DVD-VCR to the television using
the RCA cable if the appropriate input is available on
the television. You thus:
◆
Obtain better quality sound and pictures
◆
Simplify the setting up procedure of your
DVD-VCR
☛
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the
screen when the DVD-VCR is switched off.
☛
Make sure that both the television and the DVD-
VCR are switched off before connecting the
cables.
1 Connect the coaxial cable as indicated on page 7.
2 Connect one end of the RCA Audio/Video cable to
the Video output and Audio L, R output socket on
the rear of the DVD-VCR.
3 Plug the other end into the appropriate connector
on the television.
You can connect other audio and/or video equipment
to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection
possibilities.
➢
The RCA input/output connectors on the rear of
the DVD-VCR are used for equipment, such as
camcorders, VCRs or sound systems.
Aerial
RF coaxial cable
TV
REAR OF THE
DVD-VCR
Camcorder
VCR
Sound system
3
2
00413B DVD-V540/XSG-ENG 5/6/04 12:07 PM Page 8