Filter
Top Products
English
- 21
Settings
4
Press the … or † button to select the required
programme number.
Press the √ button to preset the station.
The MANUAL TUNING menu will be displayed.
5
Press the œ or √ button to start scanning the
channels.
The frequency band is scanned and the first
station found is displayed.
6
If necessary, press the … or † button to select
MFT, then press the œ or √ button to adjust the
picture.
7
Press the … or † button to select NAME.
The station name is set automatically from the
broadcast signal.
•To change the programme’s name, press the
√ button. The first letter of the name flashes.
❉ ❉ MANUAL TUNING ❉ ❉
PR : 1
CH : 021
MFT : -
NAME : - - - -
……†† œœ √√
MEMORY: OK
RETURN
❉ ❉ MANUAL TUNING ❉ ❉
PR : 1
CH : 021
MFT : -
NAME : - - - -
……†† œœ √√
MEMORY: OK
RETURN
❉ ❉ MANUAL TUNING ❉ ❉
PR : 1
CH : 021
MFT : -
NAME : - - - -
……†† œœ √√
MEMORY: OK
RETURN
Select a character
in the name
Move to the next
previous or
character
Press the … or † button until the
required character is displayed
(letters, numbers or “-” character).
Press the œ or √ button
respectively.
To... Then...
8
9
Repeat this procedure from step 4 onwards, until
all the required stations have been stored.
10
Press the MENU button to exit the menu.
If you... Then...
Wish to store the
station displayed
Do not wish to
store the station
displayed
•
Press OK to store the station.
•
Press the … or † button until the
CH is selected.
•
Press the œ or √ button to go on
scanning the frequency band and
display the next station.