Samsung DVD-H1080W DVD Player User Manual


 
English _35
REFERENCE
reference
Firmware upgrade
Introduction
Samsung will often support the software upgrade to improve
the performance of this unit to the latest status, through
Samsung Internet Site (www.samsung.com).
Because the specially new mpeg4 codec continues and it is
appearing. What improvements are made depends on the
upgrade software you are using as well as the software that
your DVD-player contained before the upgrade.
How to make an upgrade disc
Write the downloaded file onto a blank CD-R or CD-RW disc,
using the following settings :
1. You have to download a new file through Download Center
of Samsung Internet Site (www.samsung.com).
2. Write the file to Disc using CD-RW of your computer.
Upgrade procedure
1. Open the disc tray of your DVD-Player.
Place the burned disc on the tray. Close the tray.
The Firmware upgrade screen will appear.
Firmware upgrade
menu appears
2. Press enter or play upgrade
- Press any other button on the remote control to cancel the
upgrade and eject the dics (eg.
π etc).appear.
Firmware upgrade
starts
Upgrade file detected
Curent version: 07.01.03.08.H1080XAA
Update version: 07.02.03.09.H1080XAA
Upgrade ?
Press Play to start
File copying
Upgrade file detected
Curent version: 07.01.03.08.H1080XAA
Update version: 07.02.03.09.H1080XAA
Upgrade ?
Press Play to start
Upgrade file detected
Curent version: 07.01.03.08.H1080XAA
Update version: 07.02.03.09.H1080XAA
Upgrade ?
Press Play to start
Upgrade
Firmware upgrade
menu starts
- During the firmware upgrade process, the tray will open.
Please remove the disc and wait for about 2 minutes.
- If the DVD player was successfully updated, the disc
tray will close and the unit will turn off and on.When the
unit turns on, the Select Menu Language screen will
appear.
3. Press the π/† buttons to select the desired language, and
then press the ENTER button.
Select Menu Language
English
Français
Deutsch
Español
Italiano
Nederlands
Note
- File system CD-ROM
- Character set ISO 9660
- Finalized, single session
- Write speed low
Note
- If the “Select Menu Language” doesn’t appear,
please contact Samsung Customer Service.
- Do not press any button or unplug the power cord
during the upgrade.
- The upgrade procedure may change, refer to the
web site (www.samsung.com).