Filter
Top Products
Slow Repeat play
Using the Disc View Function
Track View (VCD)
Index View (VCD)
Displays the beginning view of each track and the
track number.
1
1
During play, press the TOP MENU button.
2
2
Press the UP/DOWN buttons to select TRACK
VIEW. Press the ENTER button.
3
3
Select the desired view by pressing the
UP/DOWN or LEFT/RIGHT buttons.
- Press the SKIP button for the next 9 tracks if the
movie has more than 9.
4
4
Press the ENTER button.
Displays the equally divided 9 views of the current
playing track.
1
1
During play, press the TOP MENU button.
2
2
Press UP/DOWN buttons to select INDEX
VIEW. Press the ENTER button.
3
3
Select the desired view by pressing
UP/DOWN or LEFT/RIGHT buttons.
4
4
Press the ENTER button.
NOTE
31
30
• When pressing the TOP MENU button with a DVD; the disc’s TITLE MENU function comes up. A disc must
have at least two titles for the TITLE MENU function to work.
• When pressing the TOP MENU button with a CD; the unit enters the INTRO mode. INTRO lets you listen
to the beginning of each track for about 10 seconds.
• You can also operate it using the DIGEST button.
ADVANCED
FUNCTIONS
When playing a DVD
1
1
Press the PLAY/PAUSE button.
2
2
Press and hold the SKIP button to choose the play speed between 1/8X, 1/4X, and
1/2X of normal. (DVD-S428K only)
Press the FORWARD SEARCH button to choose the play speed between 1/8X, 1/4X,
and 1/2X of normal. (DVD-S128/DVD-S228/DVD-S328K only)
3
3
Press the "REPEAT A-B" of the remote control once at the first section to repeat while
the multiple-speed is selected (A-point selection).
4
4
Press the "REPEAT A-B" button again (B-point selection).
NOTE
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
• The disc will play from A to B repeatedly at the speed you chose.
• To terminate the function, press the 'CLEAR' button or the 'REPEAT (A-B)' button again.
Then press play to resume normal playback.
• A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been set.
00015M S128/XSS Eng2 8/7/02 12:05 PM Page 30