Filter
Top Products
English
- 23
You can set repeat play to repeat the tape
continously from beginning to end.
1 Press the MENU button, then press the ➐ or
❷ button to select VCR.
2 Press the OK or ❿ button, then press the
➐or❷ button to select Repeat Play.
Press the OK or ❿ button to select On or Off.
• On: Repeat play.
• Off: Do not wish to repeat play.
Selecting the Recording Speed
Video cassettes have a safety tab to prevent
accidental erasure. When this tab has been
removed, you cannot record on the tape.
1 If you wish to protect a cassette, break off the
tab using a small screwdriver.
2 To re-record over a protected cassette (safety
tab broken), cover the hole with adhesive
tape.
You can record a cassette at two different
speeds:
• SP (Standard Play)
• LP (Long Play)
In Long Play modes:
• Each cassette lasts twice as long
• The recording is of a slightly lower quality
1 Press the SPEED button to select SP or LP.
• The selected record speed will appear on
the front panel display.
Type Recording Time (in SP)
E180 180 mins. or 3 hours
E240 240 mins. or 4 hours
E260 260 mins. or 4 hours and 20 mins.
E300 300 mins. or 5 hours
Protecting a Recorded Cassette
Selecting the Cassette Type
If you wish to use the tape counter to display the
time remaining on a cassette, you must indicate
the type of cassette inserted.
1 Press the MENU button, then press the ➐ or
❷ button to select VCR.
2 Press the OK or ❿ button.
The Tape Select is highlighted.
3 Press the OK or ❿ button to select the
correct cassette length.
➝ E180 ➝ E240 ➝ E260 ➝ E300
• Press the MENU button to exit the menu.
Repeat Play
SETUP
VCR
PROG
FUNC
DVD
VCR Setup
Tape Select : E180
❿❿
Repeat Play : Off
❿❿
SETUP
VCR
PROG
FUNC
DVD
VCR Setup
Tape Select : E180
❿❿
Repeat Play : Off
❿❿