Filter
Top Products
116
O
O
O
O
O
General
Game Mode
Auto Power
Safety Lock
Standby Control
Lamp Schedule
Max. Power Saving On
-
The displayed image may differ depending on the model.
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
•
On
Power-saving mode will activate if no input signals are detected.
•
Off
The message No Signal will appear if no input signals are detected.
―
The Standby Control option is only enabled when Source List is set to PC, HDMI.
―
If No Signal is displayed although a source device is connected, check the cable connection.
Lamp Schedule
Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.
•
Off / On