Filter
Top Products
ENG-63
Changing
Setup Menu
CHANGING S
ETUP MENU
The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small).
Select the size of the speakers to be connected.
Œ
Front (FL, FR)
- Large: Outputs the bass frequencies of the speaker from the Front(FL, FR).
- Small: If the sound distorts or the surround sound effects are difficult to hear, select this.
This activates the Dolby Digital bass redirection circuitry and outputs the bass
frequencies of the speaker from the subwoofer.
´
Center
- None: If you do not connect a center speaker, select this.
- Large: Outputs the bass frequencies of the center speaker.
- Small: If the sound distorts, select this.
This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of
the center speaker from other speakers.
ˇ
Surround (SL, SR)
- None: If you do not connect a center speaker, select this.
- Large (Rear/Side): Outputs the bass frequencies of the rear speaker.
- Small (Rear/Side): When the sound distorts or the surround sound effects are difficult to hear,
select either of these according to the rear speaker’s position.
This activates the Dolby Digital bass redirection circuitry and outputs the
bass frequencies of the rear speaker from other speakers.
Setting up Test
The test output signals come clockwise starting from the Front Speaker(L).
Adjust Channel Balance so that speakers output equally in your room.
FRONT(L) ➝ CENTER ➝ SUBWOOFER ➝ FRONT(R) ➝ SURROUND(R) ➝ SURROUND(L)
Note
To make the Setup menu disappear or return to menu screen during set up, press RETURN or
œ
button.
• The subwoofer test output signal is lower in volume than the other speakers.
• The MPEG Multichannel logo is a trademark registered by the PHILIPS Corporation.
• If you set Front (L, R) “Small”, LFE (Subwoofer) is set “On” automatically.
00627B-HD950-XAA-2 5/6/05 3:26 PM Page 63