Filter
Top Products
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the (Power) button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic settings proceed automatically and subsequently:
Setting the language, checking the antenna input, memorizing the channels, and setting the time.
NOTE
• The Plug & Play function operates after plugging in the TV for the first time.
English - 28
Operation
1
Press the POWER button on the remote
control. The message “Menu language,
Channels and Time will be set.” is
displayed.
Press the ENTER button, then “Select
Home Mode when installing this TV at
home.” menu is automatically displayed.
2
Press the œ or √ button to select “Shop”
or “Home”, then press the ENTER button.
“Select the language of the OSD” menu is
automatically displayed.
3
Press the ENTER button to enter the
language. Press the … or † button to
select language, then press the ENTER
button. “Selects the antenna to execute
the Auto Program Function.” menu is
automatically displayed.
Continued...
Plug & Play
Skip
Select the language of the OSD.
Language
English
Español
Français
Enter
Move
Plug & Play
Skip
Select Home Mode when installing this TV at
home.
Enter
Move
• The message to check the connected
status of the antenna is displayed.
• The default selection is “Home”.
•We recommend setting the TV to
Home mode for the best picture in
your home environment.
• Shop mode is only intended for use in
retail environments.
• If the unit is accidentally set to Shop
Mode, press and hold the MENU
button on the side panel of the TV for
five seconds to return to Dynamic
(Home) mode.
Shop Mode, Menu language,
Channels and Time will be set.
i
Start
HomeShop
BP68-00617A-00Eng(028~049) 8/23/06 2:37 PM Page 28