Filter
Top Products
English - 8
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK"
selected.
2. Select the appropriate language by pressing the
▲
or
▼
button. Press the ENTER button to confirm your choice.
3. Press the
◄
or
►
button to select “Shop” or “Home”, then the
ENTER button.
We recommend setting the TV to Home mode for the best picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
press the Volume button and then hold down the MENU button for five seconds on the side
panel of the TV.
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER
button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the
▲
or
▼
button.
Press the ENTER
button to confirm your choice.
6.
The "Auto Store" menu is displayed with the "Start" selected. Press the
ENTER
button.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER button at any time to interrupt the memorization process.
7. Press the ENTER
button.
Select the "Month", "Day", "Year", "Hour" or "Minute" by pressing the
◄
or
►
button.
Set the "Month", "Day", "Year", "Hour" or "Minute" by pressing the
▲
or
▼
button.
You can also set the "Month", "Day", "Year", "Hour" and "Minute" by pressing the number
buttons on the remote control.
8. Press the ENTER button to confirm your setting. The message "Enjoy your viewing" is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message will automatically disappear after several
seconds.
Plug & Play
Language
: Select your language.
Country
: Select your country.
Auto Store
: Automatically scans for and stores channels available in the local area.
Clock Set
: Sets the current time for the TV clock.
Plug & Play
Start Plug & Play.
Enter Exit
OK
BN68-01177H-X0Eng-0807(��).indd 8 2007-08-07 �� 4:22:12