Filter
Top Products
English-35
SPECIAL FEATURES
3
Press the UP/DOWN
buttons to select “Source”,
then press the ENTER
button.
Select a source of the sub
picture by pressing the
UP/DOWN buttons and
press the ENTER button.
Swapping the Contents of the PIP and Main image
Selecting a Signal Source (External A/V) for PIP
5
Press the UP/DOWN buttons to
select “Channel”, then press the
ENTER button.
Press the UP/DOWN buttons
to select the desired channel in the
PIP window.
Changing the PIP Channel
6
Press the UP/DOWN buttons
to select “Position”, then press the
ENTER button.
Press the
UP/DOWN
buttons to select the desired PIP
window position.
Changing the Position of the PIP Window
7
Press the UP/DOWN buttons to
select “Size”, then press the
ENTER button.
Press the
UP/DOWN buttons to
select the desired size of the PIP
window.
Press the
EXIT button to exit.
Changing the Size of the PIP Window
• When the PC is in energy saving mode, you cannot choose the PIP option.
• You may notice that the picture in the PIP window becomes slightly unnatural when you use the main
screen to view a game or karaoke.
• You can adjust picture position only by using the size menu.
4
Press the UP/DOWN
buttons to select “Swap”,
then press the ENTER
button.
Note: Source selection is possible only when Component 1,
Component 2, DVI, or PC is connected.
MAIN: Component 1, Component 2,
DVI, PC
PIP: TV
“Channel” is inactive and not
available in TV mode. However,
they become active and available
in Component 1, Component 2, DVI, and
PC modes.
When main picture is set to TV/AV/
S-Video, only Component1/Component2/
DVI/PC can be selected and when main
picture is set to Component1/
Component2/DVI/PC, only TV/AV/
S-Video can be selected.
BN68-00751A-01ENG.qxd 8/7/04 6:31 PM Page 35