Filter
Top Products
English-24English-24
OPERATION
Labeling Channels
1
Press the MENU button to
display the menu.
Press the
UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
Press the
UP/DOWN
buttons to select “Name”, then
press the ENTER button.
2
Press the UP/DOWN
buttons to select a channel.
You can assign a name to a
channel.
Press the
LEFT/RIGHT
buttons to move to “Labeling”
and use the UP/DOWN
buttons to assign a name.
Repeat this procedure to enter
up to four characters.
Press the
EXIT button to exit.
Alternate method:
Use the number buttons to directly select the channel that will be added or
erased. Press the “ADD/DEL” button.
Repeatedly pressing the
ENTER button will alternate between “Add”
and “Delete”. Press the EXIT button to exit.
You can view any channel (including an erased channel) by using the number
buttons on the remote control.
1
Use the number buttons to
directly select the channel to
Add or Delete.
Press the
MENU button to
display the menu.
Press the
UP/DOWN
buttons to select “Channel”, then
press the ENTER button.
Press the
UP/DOWN
buttons to select “Add/Delete”.
Press the
ENTER button.
Press the
ENTER to select
“Add” or “Delete” (Pressing the
ENTER button toggles
between the two).
Press the EXIT button to exit.
Adding and Erasing Channels (Manual Method)
The characters available:
- Letters of the alphabet (A~Z)
- Numbers (0~9)
- Special characters (space, -, *)
BN68-00751A-01ENG.qxd 8/7/04 6:31 PM Page 24