Filter
Top Products
The mains lead is attached to the rear of your TV.
☛
If you have purchased this TV in the United Kingdom, refer
to page 43 for further instructions on plug wiring.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the TV and the
frequency is 50 or 60Hz.
2 Press the POWER button ( ) on the front of the TV.
Result
: The Standby indicator lights up on the front panel.
3 Press the POWER button ( ) on the remote control to switch the
TV on.
Result
: The programme that you were watching last is
reselected automatically.
➢ When you switch the TV on for the very first time, you will
be asked to choose the language in which the menus are to
be displayed (see page 14).
4 To switch your TV off, press the ON/OFF button ( ) again.
Your TV can be placed in Standby mode, in order to reduce:
◆ Power consumption
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER button ( ) on the remote control.
Result
: The screen is turned off and a green Standby indicator
appears on the front of the TV.
2 To switch the TV back on, simply press the POWER button ( )
again or a number button.
➢
Do not leave your TV in Standby mode for long periods
of time (when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial.
Switching Your TV On and Off
Placing Your Television in Standby Mode
English-12