Filter
Top Products
English-21
Storing Channels Manually
8
If you know the channel number to be stored,
Press the or button to select the
Channel
.
Press the
ENTER
button.
Select
C
(Air channel) or
S
(Cable channel) by pressing the
or button and then press the
ENTER
button.
Select the required number by pressing the or button
and then press the
ENTER
button.
If there is abnormal sound or no sound, re-select the
sound system required.
You can also set a
channel
by pressing number buttons on the
remote control.
9
If you do not know the channel numbers, press the or button
to select
Search
.
Press the
ENTER
button.
Start the
Search
by pressing the or button.
Press the
ENTER
button.
Result: The tuner scans the frequency range until the first channel
or the channel that you selected is received on your screen.
10
Press the or button to select
Store
.
Press the
ENTER
button.
The
OK
is selected.
Result
: The channel and associated programme number are
stored.
11
Repeat Steps
8
to
10
for each channel to be stored.
12
Press the
EXIT button to exit
.
02-BN68-00969A-00Eng.qxd 8/10/05 3:29 PM Page 21