Filter
Top Products
9 If you know the number of the channel to be stored....
Press the or button to select
Channel and then press the
ENTER
button.
Select
C (Air channel) or S (Cable channel) by pressing the
or button.
Press the button to select Channel.
Select the required number by pressing the or button and
then press the
ENTER
button.
If there is abnormal sound or no sound, re-select the sound
system required.
10 If you do not know the channel numbers, press the or button
to select
Searching
and then press the
ENTER
button.
Searching
by pressing or button and then press the
ENTER
button.
Result: The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
11 Press the or button to select
Store
and then press the
ENTER
button.
Select
Yes
by pressing the or button and then press the
ENTER
button.
Result
: The channel and associated programme number are
stored.
12 Repeat Steps 9 to11 for each channel to be stored.
Channel mode
P (Programme mode): When tuning is completed, the
broadcasting stations in your area will have been assigned to
position numbers from P00 to P99. You can select a channel
by entering the position number in this mode.
C (Real channel mode): You can select a channel by entering
the assigned number to each broadcast station in this mode.
S (Cable channel mode): You can select a channel by
entering the assigned number to each cable channel in this
mode.
English-17
Storing Channels Manually
1-19.qxd 3/22/04 6:54 PM Page 17