Filter
Top Products
161
System
8
8 System
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the Internal Speaker.
1 Select Receiver and set to On.
2 Press the EXIT button to exit.
z If your receiver supports audio only, it may not appear in the device list.
z When the receiver (i.e Home Theater) is set to On, you can hear sound output from the
product Optical jack. When the source is a digital component such as a DVD player and it is
connected to the product via HDMI, you will hear only 2 channel sound from the receiver.
Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work.
z Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
z You can connect only one receiver (home theater).
z Check if the Anynet+ device power cord is properly connected.
z Check the Anynet+ device’s Video/Audio/HDMI cable
connections.
z Check whether Anynet+ (HDMI-CEC) is set to On in the
Anynet+setup menu.
z Check whether the remote control is Anynet+ compatible.
z If you have removed and then reconnected the HDMI cable,
please make sure to search devices again or turn your product off
and on again.
z Check if the Anynet+ function of the Anynet device is set on.
I want to start Anynet+.
z Check if the Anynet+ device is properly connected to the product
and check if the Anynet+ (HDMI-CEC) is set to On in the
Anynet+ Setup menu.
z Press the TOOLS button to display the Anynet+ menu and select
a menu you want.
I want to exit Anynet+.
z Select View PC in the Anynet+ menu.
z Press the SOURCE button on the product remote control and
select a non- Anynet+ device.
The message “Connecting to
Anynet+ device...” appears on
the screen.
z You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
z Use the remote control after the product has completed Anynet+
configuration or has finished switching to Anynet+.