Samsung PL58A650T1F Flat Panel Television User Manual


  Open as PDF
of 230
 
English - 20
Memorizing the Channels
Your TV can memorize and store all of the available channels for both air and cable channels. After the available
channels are memorized, use the CH
RETURN
TOOLS
INFO
W.LINK
CH LIST
EXIT
or CH
RETURN
TOOLS
INFO
W.LINK
CH LIST
EXIT
button to scan through the channels. This eliminates the need
to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding and deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a Cable
system).
1
Press the MENU button to display the menu.
Pressthe▲or▼buttontoselect
Channel, then press the ENTER button.
2
Press the ENTER button to select Antenna.
Pressthe▲or▼buttontoselect
Air or Cable, then press the ENTER button.
Press the EXIT button to exit.
Continued...
Using the Remote Control Backlight Buttons
Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly.
1 1. Press the ON/OFF light button
➢
Pressing the ON/OFF light button toggles between ON and OFF.
➢
When ON, the button backlight is turned on for a moment.
➢
Pressing a remote control button when the remote control is on turns the button backlight on for a moment. If
you touch or move the remote control and the motion is detected by the sensor of the remote control, the button
backlight will be turned on for a moment.
➢
The remote contains two small movement sensors that control the backlight function. If you shake or drop the
remote, you may hear the sensors rattle. This is normal and is not a defect.
➢
The button backlight will not be turned on when the remote control is turned off.
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The TOOLS menu
changes depending on which external input mode you are viewing.
1 Press the TOOLS button.
The
TOOLS menu will appear.
2 Pressthe▲/▼buttontoselectamenu,thenpresstheENTER button.
3 Pressthe▲/▼/◄/►/ENTER buttons to display, change, or use the selected
items. For a more detailed description of each function, refer to the correspond-
ing page.
Antenna
:
Air
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Air
Cable
ChannelChannel
Antenna
:
Air ►
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Device List
Multi-Track Sound : Stereo
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Add to Favorite
Switch to Cable
Tools
Move Enter Exit
●DeviceList,seepage102
●Multi-TrackSound,seepage38
●PictureMode,seepage23
●SoundMode,seepage36
●SleepTimer,seepage55
●AddtoFavorite,seepage43
●SwitchtoCable(orSwitchtoAir),seepages20~21
●PIP:seepages34~35
●Autoadjustment:seepage50
BN68-01824A-Eng.indb 20 2008-08-05 오후 4:41:10
 previous next