Filter
Top Products
5
01 Getting Started
English
Install the Stand
See separate guide for installing the stand.
(M4 X L16)
Stand (1EA) Guide Stand (1EA) Screws (10EA)
Follow the steps below to connect the TV to the stand.
s
s
s
s
1. Connect the Guide Stand to the Stand
using six screws (M4 X L16).
2. With your TV upright, connect
the TV to the Stand.
3. Fasten two screws (M4 X L16)
at position 1, and then fasten
two screws (M4 X L16) at
position 2.
✎
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the PDP TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
[
Do not insert your fingers into the stand base slot of the TV when installing the stand base.
Top view
Rear
Guide Stand
Screws (M4 X L16)
Stand
s
s
s
s
1
2
s
s
s
s
1
2
Screws (M4 X L16)
[PC430_USA]BN68-02576A-04Eng.indb 5 2010-06-24 오후 7:36:01