Filter
Top Products
English - 17
Fine Tuning Channel Reception
1 Press the MENU () button to display the menu.
2
Press the … or † button to select Channel, then press the
ENTER/OK ()
button.
3
Press the … or † button to select Fine Tune, then press the
ENTER/OK () button.
4 To obtain a sharp and clear picture and good sound quality, press the
œ or √ button until you reach the optimal setting.
Press the
ENTER/OK ()
button.
➢
To reset the fine tuning to 0, select Reset by pressing the
… or †
button. Press the ENTER/OK () button.
5 Press the EXIT button to exit.
➢
Fine Tune Store will change the colour of the Channel OSD (On Screen
Display) from White to Red and add the “*” mark.
P1
*
Mono
P1
*
+
3
Reset
Fine Tune
Adjust Save Return
➢
Not available in DTV or external input mode.
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and
store operation.
If the signal is weak or distorted, you may have to fine tune the channel manually.
LNA (Low Noise Amplifier)
1 Press the MENU () button to display the menu.
2
Press the … or † button to select Channel, then press the ENTER/OK ()
button.
3 Press the
… or †
button to select LNA, then press the ENTER/OK ()
button.
4 Select Off or On by pressing the … or † button, then press the ENTER/OK
() button.
5 Press the EXIT button to exit.
➢
Depending on areas, factory mode of LNA, will be set up as On or Off.
This function is very useful in the situation that the TV is used in weak signal.
LNA amplifies the TV signal in the weak signal area, a low-noise preamplifier boosts the incoming signal.
Channel
Move Enter Return
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
TV
Channel
Move Enter Return
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
TV
)
by
BN68-00889Q-01Eng(UK) 8/28/06 11:22 AM Page 17