![](http://pdfasset.owneriq.net/f/3a/f3a4e341-65d6-bfa4-2d78-ed4c53eb0523/f3a4e341-65d6-bfa4-2d78-ed4c53eb0523-bg1a.png)
English - 26
OPERATION
Adjusting the Screen Automatically (Self Focus)
The “Self Focus” feature automatically sets the optimum picture quality when blurring,
overlapping colors or incorrect focus occurs. These conditions may be caused by moving your
TV.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Picture”, then
press the ENTER button.
2
Press the … or † button to
select “Self Focus”, then
press the ENTER button.
“Self Focus” is selected.
Press the ENTER button
again.
The self focus process
begins with the message
“Self Focus” and horizontal
bar displayed.
When it is finished, the
displays will disappear and
the optimum picture quality
can be enjoyed.
Press the EXIT button to exit.
Mode : Dynamic √
Size : 16:9 √
Self Focus √
Manual Convergence √
T V Picture
Self Focus √
Auto Perform : On √
Message Display : On √
Self Focus
T V
œ During the process, minor
distortions of the picture may
occur. At this time, the colors
may diffuse and a searching
pattern will appear on the
edges of the screen. This is a
normal part of the
adjustment.
• Changing channels and any other signal changes will pause the self focus until a stable signal has
returned. It resumes after the signal has been stabilized. This feature will not work without a signal.
•Ambient light that is too bright may affect the self focus. If this occurs, darken the environment and
try again.
Alternate method:
Simply press the SELF
FOCUS button on the
remote control to enjoy the
optimum picture quality.
Self Focus
Self Focus
BP68-00334B-01Eng 2005/05/06 12:29 PM Page 26