Filter
Top Products
CHAPTER THREE: TV OPERATION 3.1
Chapter Three
OPERATION
Turning the TV On and Off
Press the Power button.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, five basic customer settings proceed automatically and
subsequently: Setting the language, Setting the Clock, Setting the Antenna, Ant. input check,
and Auto program.
1
Press the Power button on
the remote control.
The message “Plug & Play”
is displayed.
It flickers for a little while and
then the “Language” menu is
automatically displayed.
2
Move the joystick to the right
or left to select the desired
language. Press Menu to
enter the language, and then
the “Clock Set” menu is
automatically displayed.
3
Move the joystick down to
select “Clock”. Set the hour
or minute by moving joystick
(refer to “Setting the clock”
on page 3.19.)
Press Menu to enter the set-
ting the clock, and then the
“Antenna” menu is automati-
cally displayed.
continued...
01509D(E)-CHAPTER 3 2004/10/19 09:20 AM Page 1