Samsung TX-P2764 CRT Television User Manual


 
INSTALLATION
19
Connecting to DVI (Digital Visual Interface)
By inputting a high-bandwidth Digital Content Protection high-definition picture source
to the DIGITAL INPUT jack on the TV, high-definition pictures can be displayed on the
screen in their digital form. (This DIGITAL INPUT jack is for use in the future when
High-bandwidth Digital Content Protection DTV decoders, DVD players and D-VHS are
put on the market.)
1
Connect a coaxial cable
between the ANTENNA
OUT terminal on the Set
Top Box and the antenna
terminal on the TV.
Set Top Box Rear Panel
Coaxial Cable
TV Rear Panel
2
Connect a set of audio
cables between the AUDIO
INPUTjacks on the TV and
the AUDIO OUT jacks on
the Set Top Box.
Set Top Box Rear Panel
Audio Cable
3
Connect a DVI cable
between the DIGITAL
INPUTjack on the TVand
the DVI OUTjack on the
Set Top Box.
DVI 25-pin Cable
TV Rear Panel
Set Top Box Rear Panel
TV Rear Panel
Notes
The DIGITAL INPUT jack can only be use with 1080i and 480p picture signals.
Set the DTV decoder DIGITAL OUTPUT jack output setting to 1080I OR 480P.
For detailed information, refer to the Set Top Box instruction manual.
The DIGITAL INPUT jack is not compatible with the picture signal of a personal computer.
Use a DVI 25-pin cable (commercially available) in order to digitally connect the TV with a
DTV decoder.
K61A_AA03447A_00Eng 4/22/04 2:23 PM Page 19