Filter
Top Products
30_ connecting with other device
connecting with other device
Installing the camera (SED-1001R)
Precautions before installation
Ensure you read the following instructions before installing the camera:
Select an installation site (ceiling or wall) that can endure at least 5 times of the camera weight.
Stuck-in or peeled-off cables can cause damage to the product or a fire.
1. Hold down the bottom lock lever while removing the cover with the
other hand.
2. Press and hold the lock key outward (in the arrow direction) and turn
the bracket counter clockwise to remove it.
3. Use the provided screws (x3) to fix the bracket to a desired
position (ceiling or wall).
Ensure that the <CAMERA FRONT> label on the bracket faces the
direction for camera monitoring.
4. Arrange the cables through the bracket to the ceiling or wall.
If you intend to drill a hole in the installation site for the wiring
purpose, remove the wiring cover to reveal a hole. Arrange the
cables through the hole.
If you intend to arrange the cables without drilling a hole, use the
empty area opposite to the <CAMERA FRONT> label side for the
wiring purpose.
Wiring Cover