Filter
Top Products
5-8
HDD Setup
● HDD Information
Displays the number, capacity, and status of ATA and USB device. Setup is not available.
Status : Internal HDD, External HDD, Backup HDD
● External HDD Setup
1. Backup/External type
You are able to determine the usage of USB.
Not Defined ➝ Appears when the usage of connected HDD is not defined.
You can set to External or Backup type.
No Device ➝ Appears when there is no HDD connected. You are able to connect it by
pressing the right connection TAB after connecting HDD
External ➝ Appears when the connected HDD is set to External type. It may used as a
backup HDD if you press the “Enter” key and turn to Backup.
Backup ➝ Appears when the connected HDD is set to Backup. If you press the “Enter”
key and turn to External(Extend), it can be used as an External HDD.
Caution
Caution
[Device Erase]
Data will not be deleted in the backup mode.
Please be sure to stop the backup before you delete a data. In the recording mode, suspend
the recording and delete a data.
Caution
Caution
[USB S/W Upgrade]
Download the software to upgrade at http://www.sec.co.kr, CCTV Part.
If the USB memory to upgrade has a format not being supported by DVR set, the upgrade is
impossible.
In this case, use the “device erase” of menu 5-7 system information and setup.
Only one file to upgrade is allowed in the USB Memory.
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-8