Filter
Top Products
English - 47
Viewing an External Signal Source
Use the remote control to switch between viewing signals from
connected equipment, such as VCR, DVD, Set-Top Box and the TV
source (broadcast or cable)
1 Press the MENU () button.
Result
: The options available in the Input group are
displayed.
2 Press the ENTER () button.
Result
: The Source List is selected.
3 Press the ENTER () button again.
4 Press the ▲ or ▼ button to select signal source, then press the
ENTER () button.
➢
◆
When you connect equipment to the TV, you can choose
between the following sets of jacks :
Ext.1, Ext.2,
Ext.3, or Component on the TV’s rear panel, and AV or
S-Video on the TV’s side panel.
◆
You can select these options simply by pressing the
SOURCE () button.
5 Press the MENU () button.
Result
: The options available in the Input group are
displayed again.
6 Press the ▲ or ▼ button until the Edit Name is selected.
Press the
ENTER () button.
7 Press the ▲ or ▼ button to select the external source to be edited.
Press the
ENTER () button.
Result
:
The device names available are listed
.
VCR
-
DVD
-
Cable STB
-
HD STB
-
Sat. STB
-
AV Receiver
-
DVD Receiver
-
Game
-
Camcorder - DVD Combo - DHR (DVD HDD
Recorder) - PC.
8 Select the required device by pressing the ▲ or ▼ button.
Press the
ENTER () button to confirm.
➢
If you change the external source while viewing, pictures
might take a short period of time to be switched.
TV
Input
Source List : TV
√√
Edit Name
√√
Move Enter Return
TV
Input
Source List : TV
√√
Edit Name
√√
Move Enter Return
TV
Source List
TV
Ext.1 :
------
Ext.2 :
------
Ext.3 :
------
AV :
------
▼
More
Move Enter Return
TV
Edit Name
Ext.1 : --------
√√
Ext.2 : --------
√√
Ext.3 : --------
√√
AV : --------
√√
S-Video : --------
√√
Component : --------
√√
Move Enter Return
------
VCR
DVD
Cable STB
HD STB
Sat. STB
AV Receiver
▼
g
e
t
.
e
.
BP68-00457A-03(J60B_Euro_ENG) 7/12/05 5:00 PM Page 47