English - 33
Selecting the Picture Size (4:3 Model)
TV
Picture
Mode : Dynamic
√√
Custom
√√
Color Tone : Normal
√√
Size
√√
Scan Mode : Auto
√√
Digital NR : Off
√√
▼ More
TV
Move Enter Return
Size
Normal
Zoom 1
Zoom 2
Cinema
TV
Move Enter Return
r
√
You can select the picture size which best corresponds to your
viewing requirements.
1 Press the MENU ()button.
Result
: The main menu is displayed.
2 Press the ▲ or ▼ button until the Picture is selected.
Result
:
The options available in the
Picture
group are
displayed.
3 Press the ENTER () button.
4 Press the ▲ or ▼ button until the Size is selected. Press the
ENTER () button.
Result
:
The
Size
menu is displayed.
5 Select the required mode by pressing the ▲ or ▼ button.
Press the
ENTER () button.
Result : The following modes are available:
Normal
Adjusts the picture to fit into a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
Zoom 1
Vertically enlarges the picture approximately 130%.
Zoom 2
Vertically enlarges the picture about approximately
150%.
Cinema
When the top and bottom of the screen margin are
black (blank), they will change to gray.
➢
Lifting is available in the Zoom 1 or Zoom 2 mode by
pressing the
▲ or ▼ button
➢
◆ You can select these options by simply pressing
the
P.SIZE button on the remote control.
◆ The picture size can not be changed in the PIP mode.
4:3 Signal
16:9 Signal
Normal Zoom 1 Zoom 2 Cinema
Normal Zoom 1 Zoom 2 Cinema
BP68-00381D_01(J59A_ENG_M A) 7/25/05 10:37 AM Page 33