4-6
Search Screen
4-5
5
Search Tool
Brightness
: Adjust brightness of the image.
Contrast
: Adjust contrast of the image.
Smooth & Sharpness
: Make the rough image smooth and vague image clear.
Noise Reduction
: Reduce noise in the image.
Turning image
: Turn the image in the angle of 90, 180 or 270. And flipping is possible.
Restoration
: Getting back to the original image before modification by search tools.
[Notice]
Search tools an be used for one camera’s image only. Therefore, you should click stop
button and choose one image to use above tools.
6
Audio Setup
Audio playback setup
: Playback with recorded audio.
Click on left button creates “Audio Play” window as below.
Tick on the box next to “Enable” in “Audio Play” window.
Adjust volume properly.
[Notice]
• Audio can be played only on one selected channel. You cannot play audio watching more than
2 channels. You should choose one channel to play audio.
• Video loss can take place within the first 1~3 seconds of play back, this is due to the video and
audio synchronization and is not a fault
• Audio can only be played back in normal forward play. Reverse Play or Frame Play is not
possible
• Skip and delay cannot be used with audio play back.
• Please refer to [Appendix] for audio setup.
Search Screen