Samsung SRD-830DC DVR User Manual


 
English _57
USING THE DVR
Video Loss Detection
You can set the alarm to be generated on a camera disconnection, which causes a video loss.
Using the mouse may help make setup easier.
Use the up/down buttons (

) in <Event> window to
move to <Video Loss Detection>, and press [ENTER]
button.
A window of video loss detection area setup appears.
Use direction buttons (
◄ ►
) to move to a desired
item, and set the value.
Video Loss State : Sets whether to activate video loss
detection.
Alarm : Sets the alarm output method.
For further information on alarm output, refer to “HDD Alarm >
Alarm”. (Page 47)
Alarm Duration : Sets the duration of alarm signal and alarm sound.
When the video loss detection setup is done, press <OK>.
Alarm Schedule
You can set the conditions and operating hours for scheduled alarms.
Using the mouse may help make setup easier.
Use the up/down buttons (

) in <Event> window to
move to <Alarm Schedule>, and press [ENTER] button.
A window of <Alarm Schedule> settings appears.
Alarm : Sets the alarm output method.
For further information on alarm output, refer to “HDD Alarm >
Alarm”. (Page
47)
<ON> : Marked in orange, and always generates alarm on
scheduled time.
<OFF> : Marked in white, no alarm is generated even if an
event occurs.
Event Sync : Marked in Blue, generates alarm only when an event occurs.
Apply to All Alarm : Applies the configured schedule to all
alarms.
When the alarm is generated on the scheduled time, you can
stop the alarm by canceling the schedule.
When the Alarm Schedule setup is done, press <OK>.
3.
4.
5.
3.
4.
5.
M
6.
All
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1617 1819 20 2122 23
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol
OFF ON Event Sync
Apply to All Alarm
OK Cancel
Alarm Schedule
Alarm1
Video Loss Detection
OK Cancel
Previous/Next Page
CH Video Loss State
b
Alarm
b
Alarm Duration
b
1 OFF
b
None 10 sec
b
2 OFF
b
None 10 sec
b
3 OFF
b
None 10 sec
b
4 OFF
b
None 10 sec
b
5 OFF
b
None 10 sec
b
6 OFF
b
None 10 sec
b
7 OFF
b
None 10 sec
b
8 OFF
b
None 10 sec
b
All
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1617 1819 20 2122 23
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol
OFF ON Event Sync
Apply to All Alarm
OK Cancel
Alarm Schedule
Alarm1
Apply to All Alarm
OK Cancel
Apply the alarm scheduling to all?