Samsung SV-250B VCR User Manual


 
GB
21
GB
20
Changing the Preset Station Table
You can rearrange the preset TV stations according to your own
preferences programme number assigned to the station.
1 Press the MENU button on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
,
or
,
buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding
or
buttons, until the MANUAL SET
UP option is selected.
And then press the
button to select this option.
Result
: The TV STATION TABLE menu is displayed.
5 Press the corresponding
or
buttons, until the required preset
TV programme is selected.
Result
: The selected station is displayed at the same time on
the television screen.
6 To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
7 Press the
or
buttons to select required position. And then
press OK again to swap the position.
8 You can modify this station by repeating the same procedure from
Step
5 onwards.
9 On completion, press the MENU button three times to exit the
menu.
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
❷☎☎
➛❿☎☎
OK END:MENU
**
TV STATION TABLE
**
PR CH NAME
1 002 CAEB
2 --- ----
3 --- ----
4 --- ----
5 --- ----
➐❷
SWAPPING:OK
MENU
**
TV STATION TABLE
**
PR CH NAME
1 --- ----
2 --- ----
3 002 CAEB
4 --- ----
5 --- ----
➐❷
SWAPPING:OK
MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
➐❷
END:MENU
(SV-655B/650B/450B/255B/250B)
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH36
➐❷
END:MENU
(SV-655X/650X/450X/250X)
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
❷☎☎
➛❿☎☎
OK END:MENU
**
TV STATION TABLE
**
PR CH NAME
1 002 CAEB
2 --- ----
3 --- ----
4 --- ----
5 --- ----
➐❷
SWAPPING:OK
DELETE:CLR/RST MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
➐❷
END:MENU
(SV-655B/650B/450B/255B/250B)
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH36
➐❷
END:MENU
(SV-655X/650X/450X/250X)
If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1 Press the MENU button on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
,
or
,
buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding
or
buttons, until the MANUAL SET
UP option is selected.
5 Press the
button to select this option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the corresponding
or
buttons, until the required preset
TV station (PR) is selected.
7 Press the CLR/RST button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the MENU button three times to exit the
menu.
Clearing a Preset Station