Filter
Top Products
GB
29
Checking a Preset Recording
Cancelling a Preset Recording
PROG
1/JAN WED 21:28
PR DAY START
→
STOP V/P
1 WE 1 12:00
→
12:50SP ON
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
➐❷
SET:
❿
DELETE:CLR/RST MENU
PROG
1/JAN WED 21:28
PR DAY START
→
STOP V/P
1 WE 1 12:00
→
12:50SP ON
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
➐❷
SET:
❿
DELETE:CLR/RST MENU
You can check your preset recordings:
◆ When you have finished presetting the VCR
◆ If you have forgotten which programmes will be
recorded
1 - Insert the cassette. Press the TIMER button.
Press the
➐
or
❷
buttons to select the STANDARD option and
then press the
❿☎
button or,
◆ Press MENU on the remote control.
Result
: The programming menu is displayed.
◆ Press the OK button to select TIMER PROGRAMMING option.
Result
: The TIMER PROGRAMMING menu is displayed.
2 Press the
➐
or
❷
buttons to select the required programme.
3 Press the
➛
or
❿
buttons to select and change any values as
required. For more details, refer to the previous page.
4 On completion, press MENU twice.
You can cancel any programmes that are:
◆ Incorrect
◆ No longer required
1 - Insert the cassette. Press the TIMER button.
Press the
➐
or
❷
buttons to select the STANDARD option and
then press the
❿☎
button or,
◆ Press MENU on the remote control.
Result
: The programming menu is displayed.
◆ Press the OK button to select TIMER PROGRAMMING option.
Result
: The TIMER PROGRAMMING menu is displayed.
2 Select the programme to be cancelled by pressing the
➐
or
❷
buttons.
3 Press the CLR/RST button to cancel the selected programme.
Result
: All the recording information is deleted and the broad-
cast will not be recorded.
4 On completion, press MENU twice.
CLR/RST F.ADV
A.TRK IPC
AUDIO
3
CLR/RST F.ADV
TV VCR
AUDIO
SELECT
-/--
3
★
(SV-665B)
★
(SV-661B/SV-662B/
SV-661I/SV-265B/
SV-261B/SV-262B/
SV-261I)
GB
28
Using the Timer Programming Feature
TIMER PROGRAMMING
PROG OPTIONS INSTALL
CLOCK BONUS LANG
PROG
➐❷☎☎
➛❿☎☎
OK END:MENU
The Timer Programming feature allows you to preset the VCR to
record a programme up to one month before that programme is to
be broadcast. Up to six programmes can be preset.
☛ Before presetting a recording, check that the date and
time are correct.
1 - Insert the cassette. Press the TIMER button.
Press the
➐
or
❷
buttons to select the STANDARD option and
then press the
❿☎
button or,
◆ Press MENU on the remote control.
Result
: The programming menu is displayed.
◆ Press the OK button to select TIMER PROGRAMMING option.
Result
: The TIMER PROGRAMMING menu is displayed.
2 Press
❿☎
to select the input source.
3 Select the required station by pressing the
➐
,
❷
buttons or
INPUT
to select the AV1, AV2
or AUX
★
(SV-665B/SV-661B/SV-662B/
SV-661I only) input sources.
4 Press
❿
to select the recording day.
5 Select the required day by pressing the
➐
or
❷
buttons.
6 Press
❿
to select the recording start time.
7 Select the required hour value by pressing the
➐
or
❷
buttons.
8 Press
❿
to select the minutes.
9 Select the required minute value by pressing the
➐
or
❷
buttons.
10 Press
❿
to select the recording end time.
11 Select the required recording end time by pressing the
➐
or
❷
buttons, following the same procedure as when selecting the
recording start time.
12 Press
❿
to select the recording speed.
13 Press the
➐
or
❷
buttons to select the SP (Standard Play), LP
(Long Play), AUTO (Auto Tape Speed Select) recording speeds.
14 Press
❿
to select the PDC recording mode.
15 Press the
➐
or
❷
buttons to toggle between the PDC mode
(marked
ON) and the non-PDC mode (marked -).
16 When you have finished, press the MENU button.
17 Press the VCR STANDBY/ON (STANDBY/ON) button to activate
the timer.
Result
: Before starting recording, the VCR compares the timer
duration with the remaining time on the cassette.
➢ Auto Tape Speed Select. The VCR’s “Auto Tape Speed
Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the VCR automatically
switches to LP mode to record the whole programme.
**
TIMER METHOD
**
STANDARD
VIDEOPLUS
➐❷
❿
END:MENU
PROG
1/JAN WED 21:28
PR DAY START
→
STOP V/P
1 WE 1 12:00
→
12:50SP ON
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
➐❷
➛❿
DELETE:CLR/RST MENU
★
(SV-665B/SV-265B)
STANDBY/ON
S
SH
17
VCR STANDBY/ON
S
SH
17
★
(SV-665B)
★
(SV-661B/SV-662B/
SV-661I/SV-265B/
SV-261B/SV-262B/
SV-261I)