Samsung SV-662B VCR User Manual


 
GB
19
Presetting the Stations Manually
You do not need to preset the stations manually if you
have already set them automatically.
1 Press the MENU button on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
,
or
,
buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding
or
buttons, until the MANUAL SET
UP option is selected.
5 Press the
button to select a MANUAL SET UP option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the
or
buttons to select a programme number as
required.
7 Press the
❿☎
button to preset the station.
Result
: The MANUAL TUNING menu is displayed.
8 Press the
or
buttons to start scanning.
Result
: The frequency band is scanned and the first station
found is displayed.
9 Press the
or
buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
10 To change the programmes name, press the
❿☎
button.
Result
: The first letter of the name flashes.
11 To... Then...
Select a character Press the
or
button until the
in the name required character is displayed
(letters, numbers or - character).
Move to the next or Press the
or
buttons
previous character respectively.
12 If you... Then...
Wish to store the
Press the corresponding
or
❷☎
buttons,
station displayed until the
MFT is selected.
Press the
or
buttons to adjust the
picture, if necessary.
Press OK to store the station
Do not wish to
Press the corresponding
or
❷☎
buttons,
store the station until the
CH is selected.
displayed
Press the
or
buttons to go on
scanning the frequency band and display
the next station
Go back to the beginning of Step 12
13 Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
14 On completion, press the MENU button three times to exit the
menu.
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
➐❷☎☎
➛❿☎☎
OK END:MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
➐❷
END:MENU
**
MANUAL TUNING
**
PR : 1
CH : ---
MFT : -
NAME : ----
➐❷
➛❿
MEMORY:OK
END:MENU
**
TV STATION TABLE
**
PR CH NAME
1 27 CAEB
2 -- ----
3 -- ----
4 -- ----
5 -- ----
➐❷
SWAPPING:OK
DELETE:CLR/RST MENU
GB
18
Presetting the Stations Automatically
AUTO SET UP
PLEASE WAIT
2%
I--------------------I
END:MENU
YOUR DATA WILL BE LOST
PRESS OK TO CONTINUE
MENU TO EXIT
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 14).
Your VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
Plug & Auto Set up (see page 14)
Automatically
Manually (see page 19)
You can store up to 80 stations.
1 Press the MENU button on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
,
or
,
buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding
or
buttons, until the AUTO SET
UP option is selected. And then press the
button to select this
option.
Result
: A message appears, indicating that any channels
already preset on your VCR will be deleted.
5 Press OK to start the auto scanning.
Result
: The PLEASE WAIT indication flashes on the
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The VCR then searches for the second station and
so on.
When the automatic scanning procedure has
finished, the VCR switches automatically to pro-
gramme 1.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
6 If you wish to cancel the auto scanning before the end, press the
MENU button three times to exit the menu.
The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually (see
page 16).
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 20).
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
➐❷☎☎
➛❿☎☎
OK END:MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
➐❷
END:MENU