Filter
Top Products
Install Manual
32
3.1.1.3 Audio connection
Audio equipment connects to the DVR unit using RCA audio cables or D-SUB as shown in the
following figure. SVR-480 does not support D-SUB audio.
Refer to the following figure when connecting D-SUB. The audio inputs are pin numbers 5 ~ 16.
3.1.1.4 Power connection & operation
Connect the power cable as shown in the following figure.
- The DVR unit will boot automatically when the power is connected.
- To turn the DVR unit off, press the power button for 5 seconds, then choose “Yes” when the
power-off dialog appears.
- To turn the power on again, press the power button.