Samsung SVR-950E DVR User Manual


 
88
If using network by connecting the DVR body with IP router, you should
designate a port for DVR from the Setup Menu of the IP router. The main body
of SVR-1650E/1640A/950Euses 2 ports for TCP communication. In addition, it
uses DHCP function supported by IP router. Even if dynamically allocating IP
address to the main body of DVR for use, you should designate a port for IP,
which DVR receives from the Setup Menu of IP router. If using a IP router,
previously designate IP allocated to the DVR main body and port numbers
from the Setup Menu of the IP router, not using DHCP function, and set access
mode to the static IP in the DVR main body, and it is recommended to directly
input IP designated to the IP router.
For method to set IP router, refer to manual of IP router or contact the
manufacturer.
5.9.2 RS-232
Setup items needed to connect with the computer connected to the product through the serial port.
9 BAUD RATE : Setup the data transmission speed per second.
9 DATA BIT : Setup the data transmission bit.
9 PARITY BIT : Setup the error check method for data transmission.
9 STOP BIT : Setup bit to include when data transmission has been completed.