Filter
Top Products
SPECIAL FEATURES
English - 49
Tilt
Due to the Earth’s magnetic field there may be some minor image tilt depending on the
TV’s location. When this occurs, follow the steps below.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Picture”, then
press the ENTER button.
2
Press the ▲ or ▼ button
to select “Tilt”, then press
the ENTER button.
Press the
œœ
or
√√
button to
adjust the Tilt.
Press the EXIT button to exit
the menu.
Mode : Dynamic √
Size : 16:9 √
Tilt √
T V Picture
Mode : Dynamic √
Size : 16:9 √
Tilt √
T V Picture
T V Tilt
Left : 0 Right : 0
Tilt
LNA (Low Noise Amplifier)
When a weak broadcast signal causes an unclear, noisy picture, the “LNA” feature
improves the picture quality by setting to “On”. If you experience noise on a certain
channel, set the “LNA” to “On” or “Off” for this channel, to obtain the optimum picture.
2
Press the ▲ or ▼ button
to select “LNA”, then press
the
ENTER button.
Press the ▲ or ▼ button to
select ”On” or ”Off”, then
press the ENTER button
Press the EXIT button to exit.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button.
Antenna : Air √
Auto Program √
Add / Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
LNA : On √
T V Channel
Antenna : Air
Auto Program
Add / Delete
Favorite Channels
Name
Fine Tune
Signal Strength
LNA : Off
T V Channel
Off
On
Use LEFT and RIGHT buttons on the
remote control to adjust screen tilt.
œ The LNA feature only works
when tuned to an analog
channel.
AA68-03748A-00Eng 10/14/05 3:45 PM Page 49